Win7 bootet nicht mehr -> F8 funktioniert auch nicht

[Knut_]

Hallo

Ich habe hier ein Acer Notebook mit Win 7 home premium.
Das Notebook bootet leider nicht mehr (hat ganze 3 tage funktioniert -.- ).
Nach dem Bios bleibt der Bildschirm einfach schwarz.
Wenn ich beim Booten F8 drücke, passiert nichts.
Wenn ich F5 drücke erscheint das Boot-Auswahlmenü
Mit F8 sollte man nun die Erweiterten Optionen anzeigen lassen können -> schwarzer Bildschirm.

Auf dem NB sollte eine Recovery Partition vorhanden sein, aber ohne F8 kann ich wohl keine Reparatur starten.

Gibt es vielleicht noch eine andere Möglichkeit für die Systemwiederherstellung?
Eventuell eine Boot Cd? Windows 7 DVD habe ich leider keine.

Ich werde nun mal ein paar Hardware Diagnose Tools von CD ausführen.

Danke für Eure Mühe

lg Lukas

[pefo]

Was werden denn im Boot-Auswahlmenü (F5) für Möglichkeiten angezeigt?

lg

[Holgi1964]

wenn du Zugriff auf einen anderen PC mit Internet hast,
dann bekommst du in folgendem Link eine ISO von Win7
und die musst du nach dem Download nur wieder bootfähig brennen
und schon hast du eine Vollwertige Windows7 DVD,
mit der du auch die Reparatur durchführen kannst.

hier mal der Link:

UNAWAVE - Downloads von Windows 7 ISO-Image-Dateien

Dein Key funktioniert für die 32 und die 64 Bit Version.

[Knut_]

hallo

Danke für Eure Antworten

mit F5 wird nur der normale Windows 7 Start oder ein Ram Test vorgeschlagen.

Habe nun den Ram Test laufen lassen, wie ich das nächste mal hin geschaut habe war ein Bluescreen. (nach ca 30 min)
Nach einem Neustart hat sich nun die Systemstartreparatur gestartet.
Die läuft nun schon seit gut 2h -.-

Großes Danke für den Download link

Jetzt musste ich noch feststellen, dass das NB kein CD laufwerk hat
Muss ich mir wohl eine Bootfähige USB Platte basteln -.-

Danke für Eure Mühe

lg

[Holgi1964]

oder von einem USB Stick mit mindestens 4 GB installieren oder reparieren.

[Knut_]

Hallo

Danke für Eure Antworten

Win 7 Setup stößt immer wieder auf Probleme, installieren funkt einfach nicht.

Dafür hab ich es geschaft, Mandriva Linux zu installieren.

Habe auch versucht mittels Recovery Partition Win 7 wieder herzustellen, Leider bleibt die Wiederherstellung bei 48% hängen.

Ich vermute dass die Festplatte einen Schaden hat.

Habe unter Linux jetzt mal den SMART Status ausgelesen.

Könnt Ihr mir bitte beim Interpretieren helfen.

smartctl 5.39.1 2010-01-28 r3054 [x86_64-mandriva-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA family
Device Model:     WDC WD1600BEVT-22ZCT0
Serial Number:    WD-WX51E10H9372
Firmware Version: 11.01A11
User Capacity:    160.041.885.696 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Aug 29 13:48:10 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 121)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		 (4560) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  57) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   163   163   051    Pre-fail  Always       -       7705
  3 Spin_Up_Time            0x0027   159   158   021    Pre-fail  Always       -       1025
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       134
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       47
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       101
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       63
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       749
194 Temperature_Celsius     0x0022   104   098   000    Old_age   Always       -       39
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   199   192   000    Old_age   Always       -       41
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 4819 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4819 occurred at disk power-on lifetime: 46 hours (1 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 80 07 a1 e0  Error: UNC 8 sectors at LBA = 0x00a10780 = 10553216

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 80 07 a1 01 00      00:01:33.745  READ DMA EXT
  25 00 08 80 07 a1 01 00      00:01:30.512  READ DMA EXT
  25 00 08 a8 02 a1 01 00      00:01:30.512  READ DMA EXT
  25 00 08 b0 02 a1 01 00      00:01:30.512  READ DMA EXT
  25 00 08 a0 02 a1 01 00      00:01:30.512  READ DMA EXT

Error 4818 occurred at disk power-on lifetime: 46 hours (1 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 80 07 a1 e0  Error: UNC 8 sectors at LBA = 0x00a10780 = 10553216

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 80 07 a1 01 00      00:01:30.512  READ DMA EXT
  25 00 08 a8 02 a1 01 00      00:01:30.512  READ DMA EXT
  25 00 08 b0 02 a1 01 00      00:01:30.512  READ DMA EXT
  25 00 08 a0 02 a1 01 00      00:01:30.512  READ DMA EXT
  25 00 08 98 02 a1 01 00      00:01:30.509  READ DMA EXT

Error 4817 occurred at disk power-on lifetime: 46 hours (1 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 80 80 81 a0 e0  Error: UNC 128 sectors at LBA = 0x00a08180 = 10518912

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 80 80 81 a0 01 00      00:06:28.197  READ DMA EXT
  25 00 80 00 81 a0 01 00      00:06:28.197  READ DMA EXT
  35 00 08 f5 25 ff 01 00      00:06:28.196  WRITE DMA EXT
  25 00 80 80 80 a0 01 00      00:06:28.196  READ DMA EXT
  35 00 08 fd 25 ff 01 00      00:06:28.196  WRITE DMA EXT

Error 4816 occurred at disk power-on lifetime: 46 hours (1 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 80 81 a0 e0  Error: UNC at LBA = 0x00a08180 = 10518912

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 80 81 a0 01 00      00:06:25.155  READ DMA EXT
  25 00 00 80 80 a0 01 00      00:06:25.154  READ DMA EXT
  35 00 00 65 e7 01 02 00      00:06:25.152  WRITE DMA EXT
  35 00 00 65 e6 01 02 00      00:06:25.149  WRITE DMA EXT
  35 00 00 65 e5 01 02 00      00:06:25.147  WRITE DMA EXT

Error 4815 occurred at disk power-on lifetime: 46 hours (1 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 80 81 a0 e0  Error: UNC at LBA = 0x00a08180 = 10518912

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 80 81 a0 01 00      00:06:21.997  READ DMA EXT
  25 00 00 80 80 a0 01 00      00:06:21.996  READ DMA EXT
  25 00 00 80 7f a0 01 00      00:06:21.983  READ DMA EXT
  25 00 00 80 7e a0 01 00      00:06:21.972  READ DMA EXT
  25 00 00 80 7d a0 01 00      00:06:21.967  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       90%        47         3284753
# 2  Extended offline    Completed: read failure       90%        47         3284753
# 3  Short offline       Completed: read failure       90%        47         3284753
# 4  Short offline       Completed without error       00%         2         -
# 5  Short offline       Completed without error       00%         2         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Diese Zeile wird rot markiert:
197 Current_Pending_Sector 0x0032 199 192 000 Old_age Always - 41
Danke für Eure Mühe

lg Lukas

Edit:
habe nun noch mit badblocks nach defekten Sektoren gesucht... die Logdatei nimmt kein Ende...